The solution to the failure of the tumbler during operation

1. Rolling machine feeding: Turn on the vacuum pump and connect the suction tube to the suction when a certain negative pressure is reached.

2. Use a vacuum pump to evacuate and maintain vacuum.

3. Control the running time, the tumbler has a special time setting button, which can be set according to different needs. Make it the most efficient. Time varies from second to hour.

4. We can set the roll time by the scroll time on the barrel control panel. The roll machine will have a certain interval during production, and can customize the settings according to different needs. Convenient and simple. Intermittent time and working time are set separately and have separate time control buttons.

5. Move the knob on the control panel to “Run”, the vacuum pump and the inflation knob are turned “ON”, and the machine starts to run according to the setting mode.

6. After the work is finished, stop the work of the tumbler. Rotate the knob of the control panel to the stop position. If the working time is set, the machine will stop running automatically after the working time.

7. The tail work of the tumbler is to discharge the material. After the pressure inside and outside the drum is balanced, the ancient drum will release the material. After the material is discharged, the equipment will be cleaned and cleaned with a professional cleaning agent. Finally, rinse with water